11  LIBRARY ITEMS: 11, STAFF, POS,  VERT. NOTE NUM, P5)ITEM NUM,                                                                                                	   P6)HORZ. SZ., P7)VERT. SZ.,   P8,  P9,  P10                                                                                                                      P5 MAY HAVE NUMBERS 0 THROUGH 99.  NUMBERS 0-9 REFER TO                    	THE "BASIC" DRAW FILE.  (SEE 'DRAW.MAN' FOR PREPARATION                        	OF 'DRAW' FILES.)  THE "BASIC" FILE SHOULD HAVE A NAME                         	WITH 4 LETTERS AND THE NUMBER 0 ON THE END.  IF THE "BASIC"                    	NAME IS 'CHAR0' THEN NUMBERS 10 THROUGH 19 WOULD REFER                         	TO 'CHAR1'; 20-29 TO 'CHAR2', 30-39 TO 'CHAR3', ETC.                                                                                                                P8  = -1 FOR FILL ON CRT, =-2 FOR NO FILL ANYWHERE.                        	IF P8 IS GREATER THAN 0 LINE DRAWINGS WILL BE 'THICKENED'.                     	P8=.1 THICKENS ONE VERTICAL STEP NO MATTER WHAT THE SIZE FACTOR.               	P8= 1 UP TO 99 WILL THICKEN VERTICALLY PLUS 1 TO 99 LINES.                     	P8= 100 UP TO 9900 WILL THICKEN HORIZONTALLY.                                  	P8=305, FOR EXAMPLE WILL THICKEN PLUS 3 LINES HORIZONTALLY AND                 	   5 LINES VERTICALLY.                                                         		(NOTE: WHEN PRINTING LARGER SIZES THE THICKNESS WILL                          		 INCREASES PROPORTIONATELY.)                                                       P9 = CLOCKWISE ROTATION BY DEGREES.                                         	                                                                              	IF P10 IS SET TO 1 A "BASIC" FILE NAME WILL BE REQUESTED.                      	THE NAME WILL BE STORED IN P10. ANY TIME P10 IS SET TO 1                       	THE NAME WILL BE RE-REQUESTED.  ANY TIME P10 IS IGNORED THE                    	LAST NAME GIVEN WILL BE PUT INTO P10.                                          	THUS SEVERAL ITEMS CAN USE DIFFERENT "BASIC" NAMES.                            βsCREASES PROPORTIONATELY.)                                                       P9 = CLOCKWISE ROTATION BY DEGREES.                                         	                                                                              	IF P10 IS SET TO 1 A "BASIC" FILE NAME WILL BE REQUESTED.